The Aero 40 and Aero 80 are Aero FP machines. The Aero 80 has the larger hopper and blast pressure up to 300 psi. The Aero 40 has a 40 lb hopper and blast pressure up to 250 psi. Every machine has a max feed rate of 6.0 lb/min.
The PLT 60 and PCS 60 are Aero2 machines, not Ultra models. The PLT keeps a 3 mm pellet. The PCS cuts 3 mm pellets into smaller particles and is published for a lower pressure ceiling. Their blast paths differ: 1 in on the PLT 60 and 3/4 in on the PCS 60.
| Spec | Aero 40 | Aero 80 | PLT 60 | PCS 60 |
|---|---|---|---|---|
| Model shown | Aero 40FP | Aero 80FP | Aero2 PLT 60 | Aero2 PCS 60 |
| Hopper | 40 lb | 80 lb | 60 lb | 60 lb |
| Feed rate | 6.0 lb/min | 6.0 lb/min | 6.0 lb/min | 6.0 lb/min |
| Blast pressure | 20–250 psi | 20–300 psi | Up to 250 psi | 20–145 psi |
| Media | 3 mm pellets | 3 mm pellets | 3 mm in, 3 mm out | 3 mm pellets cut to 0.3–3 mm |
| Nozzle air | Not confirmed | 50–165 CFM at 80 psi | 50–165 CFM at 80 psi | 12–100 CFM at 80 psi |
| Blast path | Not confirmed | Not confirmed | 1 in | 3/4 in |
| Power | Not confirmed | Not confirmed | 110/230 V AC, 4.3 A | 110/230 V AC, 4.3 A |
| Weight | 257 lb | 389 lb | Not confirmed | Not confirmed |
The air dryer is supporting equipment, not a fifth blaster. You can also select up to three machines from the equipment catalog and open the comparison tray. Request a Rental Quote when you are ready, and say what you still need confirmed.