Nozzles
Which nozzle do you need?
A nozzle is the tip on the gun. A standard rental includes one of your choice. You may need another when the same job has both delicate material and rough material.
Air comes from the compressor, dry ice from the blaster, and both travel through the hose to the gun. The nozzle is the last piece. If the compressor is diesel, the rental also needs a portable aftercooler.
Straight nozzles
Keep the full pellet for the most cleaning power.
- 323S1

- CFM
- 100
- Length
- 23"
- Best for
- General focused cleaning
- 523M1

- CFM
- 150
- Length
- 23"
- Best for
- Focused high power
- 523S3

- CFM
- 165
- Length
- 23"
- Best for
- Wide power
- 533S1

- Length
- 33"
- Best for
- Extra reach, high power
Variable nozzles
The round dial breaks pellets into smaller particles for a more delicate blast.
- 312V1

- Length
- 12"
- Best for
- Tight spaces, small pellet
- 323V1

- CFM
- 100
- Length
- 23"
- Best for
- Small pellet, focused cleaning
- 323V2

- Length
- 23"
- Best for
- Small pellet, medium width
- 523V3

- CFM
- 150
- Length
- 23"
- Best for
- Small pellet, wide high power
How to pick a nozzle
- Check your air. Your compressor must keep up with the CFM listed under the nozzle. If it can’t, blast pressure drops and so does cleaning power. Have at least 100 PSI available.
- Straight or variable. Straight keeps the full pellet for the most power. Variable breaks pellets smaller for delicate surfaces, and can still run as a straight pass-through. Not sure? Pick variable.
- Pick a width. Narrow ends concentrate power on tough spots. Start with 1” and move wider as long as it still cleans; wide ends cover walls, ceilings, and light buildup fast.
- Pick a length. 23” is standard. Go shorter only when the space is too tight to fit or swing a 23” nozzle.
How to read a nozzle code
Cold Jet nozzles product number tells you what they are. For example, a 523V3 nozzle is a high flow, 23” length, variable pellet size fan nozzle that is three inches wide. Here’s the code.
523V3
Flow Rate
Most of our work is at 100 PSI.
Nozzle Length in Inches
23" is standard for most nozzles. 33", 23", and 12" are common sizes.
Variable, Straight, or MERN Type
Nozzle Width
The smaller the width, the more power generated for blasting. The wider the width, the larger the cleaning pattern.
This code fits the naming pattern, but we have not confirmed this exact nozzle. Ask us to check it before you count on it. Best for: small pellet, wide high power.
Request a Rental Quote for 523V3 or call 614-754-7192614-754-7192
